For all enquiries, please call: 801298-1008

Viper - Low Line Winch Viper

RED Winch Viper

This winch is the ultimate high performance single motor electric winch, capable of being used in the most demanding conditions.

The Viper is an excellent choice when it comes to the best competition lowline electric winching for your vehicle.

RED Winches has designed and developed this high performance winch for 4x4 competition use and serious motorsport events.

It has been designed with the competition in mind and has many features ideally suited to high performance motorsport events.

All products at RED winches have been through an extensive design and testing program before going on sale so you can use all our winches with confidence they will not let you down.

The Viper can give you speeds of 20m/min pulling 2700kg (24v on 12v BOW 2) and 14m/min pulling 2700kg (12v on 12v BOW 2)

Please see videos of us testing the winch in the yard if you want to see these figures in action.

Capable of pulling a minimum of 4.5 Tonnes the winch can easily get you out of trouble quickly, quietly and with minimum effort time and time again. The winch body is CNC machined from high grade heat treated aluminium from solid billets. We only use the best machine tools and machining processes to ensure stress is kept to a minimum and strength to its maximum. With its patented air free spool and brake system the Hornet offers something previously unavailable on a winch to the off-road and motorsport sectors.

With a Viper package you will get:

1. Viper Winch Anodised RED, with ‘Patented’ air brake system

2. Solenoid for brake operation (to be mounted seperatly next to winch)

3. Pneumatic toggle switch for drum Air freespool.

4. Albright Heavy Duty Solenoids x 1

5. Hard Anodised Aluminium fairlead

6. Lower mounting interface blocks x 2, used to save you damaging the expensive end housings when mounting

 

As with all our winches, the Viper winch does not come with a rope, this has to be purchased seperately.

The Viper also does not come with a Busbar set and RED Winch Busbar cover, this has to be purchase seperately or selected from the drop down menu when ordering if is required in your truck setup.

The pictures on the website show the Viper complete with the Busbar and Albright setup.

The air system:

Spring pressure applies a steel disc to the brake material when the winch is not in use.
This applies the brake and stops the winch from spooling out.

When you winch in or out you energise your Albright solenoids this also energises the air solenoid valve for the brake. This then allows air to go into a specially designed chamber that releases the brake instantly. When you remove your winching finger from the controls the air solenoid dumps the air and the springs apply the brake disc onto the brake pads. We can vary the number of springs in the brake to suit the weight of the vehicle if necessary but so far this has not be needed. More springs equals larger braking force but more abrupt stopping which can cause snatching which we do not recomend.

One nice feature is when you are lowering out you can switch your isolator off to the winch (no power to the motors) and just flick the winch out button on your dash. This fires the air solenoid and releases the brake and your vehicle only pulls out rope for the amount of drop your vehicle needs or moves. This means compared to normal winching you do not get overrun or excess rope causing snatching and jerking as the vehicle takes up the slack rope that has been spooled out. This design has been submitted for full patent and is currently protected and patent pending.

The air free-spool

A piston in the end of the drive shaft moves a large clutch plate in and out off drive pins.
The drive is provided by a large drive shaft and splined end.

Product Options

$2000.00

Electrical Power

The electrical power of this winch is currently supplied by a BOW Motor II. These are supplied normally with a 12v supply from your vehicle. The high power Albright solenoid is used to switch direction of the motor and to also provide a feed to the 12v brake system. These are all proven components and widely available and have been used extensively in the competition and motorsport industry by RED Winches for many years.

Power of the winch is variable due to how your vehicle is setup and the quality of the components used. It also depends on the scale of electrical losses or inefficiencies in the wiring system. As a general rule running 12v DC BOW Motor II with a good powerful supply you can expect the winch to pull 4.5 tonnes...possibly more under certain conditions. Tested with x2 Odyssey PC1500 batteries, 12V supply and ground connections made with 70mm2 cable.

Weights

Winch: 32kg (Without Rope)

Shipping Weight: 40kg (with no rope or accessories)

Drive System

The drive is mechanically provided by a solid steel hardened clutch plate. This is a very tough hardened plate that engages and disengages by an air supply. The clutch plate is driven from the planetary gearbox by a solid steel central shaft. The drive system has been built for strength and durability. When not engaged the ‘free-spool’ of the Viper drum is only between two roller bearings so it extremely free moving allowing the co-driver to run freely with the rope.

Drum Capacity & Pulling Capacity

The drum can hold 30m (90ft) of 12mm rope. At the end of the drum is a rope securing bolt pattern. This has been specially designed by RED winches to make rope changing easy and simple. All that is required is 1 Allen key to clamp the rope with the four bolts through the middle of the rope.
Line pulling power with electrics is in a world of its own as you probably know…and depends heavily on the quality of your electrical setup
I would say the Viper can easily pull as a minimum 4500kg directly (hanging vertically with no support from wheels) But this does mean you will need:

Twin alternators, one for the vehicle and one for the winching batteries (120A Min)
Two batteries supplying the winch motors with enough power, and one battery for the vehicle electrics
At least 70mm² high quality electrical cable
Clean electrical joints and if in areas prone to water joints should have conductive grease applied

Pulls 30m of rope in in 55 secs easily with a good electrical setup on the truck (no load)
This is only a guide as it does depend on the electrical setup and efficiencies on the vehicle......better the setup the more performance you get.
We have also been honest in our facts and have not blown the figures up high only to impress.....we work on real data as engineers....

Brakes

The patented designed brakes work in a way that they only come off when a voltage is applied. When a signal is sent to the winch to operate either forward or reverse that same signal is used to energise the magnets and release the brakes. The brakes are 12v and will always need 12v to operate which is the same voltage used to operate the solenoids. The brake pad is made from a high strength composite ensuring a high strength braking grip, and longevity of the wearing surfaces.

We would expect a set of brake pads to last at least a season if not 2 seasons due to the material they are made from.

Brake pad sets and all spare parts can be orderd if needed.

Gearbox

The gearbox has been specifically designed for strength, power and ease of service. All gears are manufactured from 655-M13 nickel chromium molybdenum steel and case hardened to give maximum strength (1100 N/mm²) and excellent durability. The end cover is sealed via an o-ring and groove, ensuring a watertight seal. Once the cover is removed access to all gears is possible and only takes 5mins to change all gears and re-assemble. The gearbox runs in grease not oil making it much easier to service in the field.

Serviceability

The Viper has been designed with both competition use and servicing in mind. Two mounting blocks are provided to interface between the winch and the mounting frame. This reduces the risk of stripping the threads in the winch casing. The free-spool assembly is held in place with machine screws for ease of service. The brake assembly is held on with x4 socket head bolts, allowing full access to the brake pads for service. Brake pads can be changed in 15 minutes.

Our Promise

We are confident to stand behind our products in competition use. All RED Winch Hornets are backed with a 2-year mechanical warranty. This covers all mechanical parts. Wearing parts, bearings, brake pads etc are excluded, as are electrical components, motors and solenoid packs
 

Submit Your Review

  • Installing a Hornet - What I Need to Know

    Introduction
    These notes are supplied to allow you to install and operate the Hornet winch in a safe, efficient and correct way. If these notes are followed you will have problem-free winching for many years.

    Important note:
    If the instructions are not followed this may lead to poor performance, damage to the winch and possible damage to your vehicle. The electrical elements of the winch are not covered by the warranty. Likewise damage caused by poor installation is not covered.

    Electrical Setup
    The Hornet is a high performance winch that delivers both speed and pulling power, demanding high current from the batteries. Because of this, the electrical setup on your vehicle must be well maintained, efficient and of adequate capacity to cope with the demands this winch will place on it. The following are a few points you must check / follow:

    1. The main earth connection for the winch motors must go to the batteries and not to the frame of your vehicle.
    2. The earth connections for the Albright solenoids must not come from the winch motor earth connection.
    3. The positive connection for the motors must come to the winch via an isolation switch rated to at least 750A.
    4. The positive switching for the Albright solenoids must not be taken from the positive supply to the winch. It must be separate from the battery. Ideally from a battery not used for the winch.
    5. The power cables for the motors (Earth & Positive) must have a minimum cross sectional area (CSA) of 70mm². Ideally you should use high capacity / high efficiency/ low resistance cables.
    6. All cable lugs should be crimped with a proper crimping tool, to keep losses to a minimum, maximize performance and reduce voltage drop.
    7. If the winch is to be used in the wet / under water the breathers on the top of the solenoid valves
    8. (brake and Freespool) must be replaced with 6mm tube running to a high point on your vehicle

    12v or 24v System
    The Hornet winch is designed for a 12v supply voltage to the motors. The motors we use are rated at 12vDC. Some owners run 24vDC on their vehicles for their winches.
    The Hornet motors can run on 24vDC and will provide you with a really strong fast winch and we have had some great results from the 24v system. However, as mentioned before we do not warranty the electrical side of the winch for 2 years like we do with the mechanical so you have to be sure your 24v setup is correct before attempting to run the winch on it. We recommend periodically checking and cleaning of the brushes on each winch motor. If running on 24V through 12V motors, we recommend checking the brushes, and cleaning the brush end cap after each event.

    12v Heavy Duty Albright Solenoids
    The Hornet winch comes with our unique ‘Heavy Duty’ Albright solenoids. These can cope with 1000A and have a stronger spring inside to ensure better contact times and more sustained power through the internal contact tips.
    WARNING: The Albright solenoid signal wires run on 12v not 24v. Applying 24v to these units can damage them and affect the performance of your winch.

    Gear Ratios
    The winch can be supplied with standard or overdrive gear sets. The Standard set gives you a fast winch that pulls in 30m of rope in around 28secs when operating from a 12v supply. The overdrive gear set will give you another 20% increase in speed and in practice with a good installation, can bring in 30m of rope in 23secs when operating from a 12v supply.

    Servicing and Maintenance
    The end covers on each end of the winch are easily removed with a 5mm & 4mm Allen key.
    After prolonged underwater or wet muddy conditions the winch must be inspected for water ingress in both the gearbox and Freespool chambers. The grease must be replaced every 3 months if the winch is constantly being used in wet conditions.
    The grease must be replaced every year under normal conditions. Under constant severe wet and muddy conditions the seals on the bearings supporting the winch drum must be removed and the bearings re-greased after every couple of events to ensure the life of the bearings.

    We recommend Castrol Spherol L-EP 2 or BP Energrease LS-EP 2 grease.
    Waterproof grease can also be used but is expensive.
    As long as the grease is a medium viscosity and has high load characteristics you will be OK.
    On a cleaned and totally dry gearbox spraying a coating of motorcycle chain lube over the gears helps as it stays on the gears during their first use reducing initial dry rubbing.

    Winch Tray
    Your winch tray must be of sound condition and securely attached to your truck. These winches can pull over 5000kg so you need to ensure it isn’t going to leave the front of your truck when under load.
    The thickness of the winch tray is also important. We have shown in operation that the plates in the tray supporting the winch must have a minimum thickness of 8mm, ideally 10mm and be flat within 0.25mm.

    If you are mounting the Hornet on the bottom and front in the winch tray one very important factor is to ensure that these surfaces are exactly 90 degrees / square to each other. If not when you bolt the winch in you can affect the winch performance and Freespool. You can under certain conditions damage the winch if used under load when the mounting surface are not flat or square to each other.

    If in doubt please consult your local RED Winch partner or buy from a reputable winch tray / bumper supplier that has winch trays specifically for the Hornet or Trydent.

    Equipment Damage
    Report any damage immediately it is noticed, especially damage to the rope, which should replaced at once. In the interim do not use the winch. We cannot be responsible for damage if the winch was continued to be used.

    Warnings:

    1. Always leave the drum and rope neatly spooled after use
    2. After a prolonged dirty wet winch session clean and wash the rope and also check gearbox and Freespool chambers for water ingress.
    3. Never attempt to disengage the Freespool whilst the winch is under load.
    4. Do not operate the winch for more than 2 minutes with the engine off and under load as it will flatten your batteries.
    5. Store the winch in gear (Freespool locked) when not in use.
    6. If the winch overloads, i.e. it stops under load, release the control button immediately and assess the situation otherwise you will damage the motors.

     

  • Are RED Winches USA customer focused...

    YES......RED Winches USA

    Our whole business has been built on supplying what the customer needs at a price that is fair to the performance you receive.

    This involves a few basics

    • Listening to the needs and wishes of our customers to deliver customer focused solutions and products
    • Ensuring the products we deliver are to the higest possible standards we can achieve
    • Reacting in good time when a customer requests help or advice

Similar Products

Copyright © 2018 Red Winches USA All rights reserved. Website Design by morphsites.com